Package: atmelwlandriver-source Version: 2.1.1-3.99woody Priority: optional Section: net Source: atmelwlandriver Maintainer: Debian QA Group Depends: debhelper (>= 4), perl, wireless-tools Recommends: kernel-package Architecture: all Filename: stable/backported-from-sarge/atmelwlandriver/atmelwlandriver-source_2.1.1-3.99woody_all.deb Size: 735282 Installed-size: 735 MD5sum: cd4bca19f0469414bad59c48672345b3 Description: Driver source for Atmel based Wireless adaptors USB/PCI/PCMCIA Most USB wireless adaptors need this driver since they use the Atmel chipset. This driver also supports Atmel based wireless PCMCIA cards and mini-PCI cards. . See http://atmelwlandriver.sourceforge.net/usbtable.html for information about your USB Wireless device . NB: This version of the driver no longer supports the intersil radios! . This packages contains the source code for the kernel module. Package: atmelwlandriver-tools Version: 2.1.1-3.99woody Priority: optional Section: net Source: atmelwlandriver Maintainer: Debian QA Group Depends: modutils Suggests: atmelwlandriver-modules Architecture: i386 Filename: stable/backported-from-sarge/atmelwlandriver/atmelwlandriver-tools_2.1.1-3.99woody_i386.deb Size: 25150 Installed-size: 68 MD5sum: 46d06b7dfa32487af744150ce6f7e423 Description: Driver source for Atmel based Wireless adaptors USB/PCI/PCMCIA Most USB wireless adaptors need this driver since they use the Atmel chipset. This driver also supports Atmel based wireless PCMCIA cards and mini-PCI cards. . See http://atmelwlandriver.sourceforge.net/usbtable.html for information about your USB Wireless device . NB: This version of the driver no longer supports the intersil radios! . This package contains the optional tools which can be used to configure the driver. Package: bind9 Version: 1:9.2.3-1.99woody Priority: optional Section: net Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libdns11, libisc7, libisccc0, libisccfg0, liblwres1, libssl0.9.6, netbase, adduser, libdns11 (=1:9.2.3-1.99woody), libisccfg0 (=1:9.2.3-1.99woody), libisc7 (=1:9.2.3-1.99woody), libisccc0 (=1:9.2.3-1.99woody) Suggests: dnsutils, bind9-doc Conflicts: bind Replaces: bind, dnsutils (<< 1:9.1.0-3) Architecture: i386 Filename: stable/backported-from-sarge/bind9/bind9_9.2.3-1.99woody_i386.deb Size: 251428 Installed-size: 521 MD5sum: 70b1076aeb9db91d89759af502278f6c Description: Internet Domain Name Server The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package provides the server and related configuration files. Package: bind9-doc Version: 1:9.2.3-1.99woody Priority: optional Section: doc Source: bind9 Maintainer: LaMont Jones Architecture: all Filename: stable/backported-from-sarge/bind9/bind9-doc_9.2.3-1.99woody_all.deb Size: 154042 Installed-size: 432 MD5sum: 8667eb37ec53065aceb2f1cc0e18b609 Description: Documentation for BIND This package provides various documents that are useful for maintaining a working BIND installation. Package: bind9-host Version: 1:9.2.3-1.99woody Priority: standard Section: net Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libdns11, libisc7, libssl0.9.6 Conflicts: host, dnsutils (<< 1:9.0.0) Provides: host Replaces: dnsutils (<< 1:9.0.0) Architecture: i386 Filename: stable/backported-from-sarge/bind9/bind9-host_9.2.3-1.99woody_i386.deb Size: 86688 Installed-size: 127 MD5sum: 4de4cc48f221ff76525cb499d14250bc Description: Version of 'host' bundled with BIND 9.X This package provides the 'host' program in the form that is bundled with the BIND 9.X sources. This version differs from the one provided in the package called host, which is from NIKHEF, and has a similar but different set of features/options. Package: bogofilter Version: 0.13.7.2-0.99woody Priority: optional Section: mail Maintainer: Clint Adams Depends: libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16) Architecture: i386 Filename: stable/backported-from-sarge/bogofilter/bogofilter_0.13.7.2-0.99woody_i386.deb Size: 225120 Installed-size: 642 MD5sum: dc51b50c1f8dd55910ba942fa43f712c Description: a fast Bayesian spam filter This package implements a fast Bayesian spam filter along the lines suggested by Paul Graham in his article "A Plan For Spam". . This version substantially improves on Paul's proposal by doing smarter lexical analysis. In particular, hostnames and IP addresses are retained as recognition features rather than broken up. Various kinds of MTA cruft such as dates and message-IDs are discarded so as not to bloat the word lists. Package: bsdutils Version: 1:2.12h-2.99woody1 Priority: required Section: base Source: util-linux (2.12h-2.99woody1) Essential: yes Maintainer: LaMont Jones Pre-Depends: libc6 (>= 2.2.4-4) Recommends: bsdmainutils Architecture: i386 Filename: stable/backported-from-sarge/util-linux/bsdutils_2.12h-2.99woody1_i386.deb Size: 63780 Installed-size: 101 MD5sum: 8301d1cbed5f117322adb3aa907f87b4 Description: Basic utilities from 4.4BSD-Lite This package contains the bare minimum number of BSD utilities needed to boot a Debian system. You should probably also install bsdmainutils to get the remaining standard BSD utilities. . Included are: logger, renice, replay, script, wall Package: bsdutils Version: 1:2.12h-2.99woody Priority: required Section: base Source: util-linux (2.12h-2.99woody) Essential: yes Maintainer: LaMont Jones Pre-Depends: libc6 (>= 2.2.4-4) Recommends: bsdmainutils Architecture: i386 Filename: stable/backported-from-sarge/util-linux.old/bsdutils_2.12h-2.99woody_i386.deb Size: 63720 Installed-size: 101 MD5sum: e2dd554a8bf734a6da55783ddb8bd272 Description: Basic utilities from 4.4BSD-Lite This package contains the bare minimum number of BSD utilities needed to boot a Debian system. You should probably also install bsdmainutils to get the remaining standard BSD utilities. . Included are: logger, renice, replay, script, wall Package: cdda2wav Version: 4:2.0-1.99woody Priority: extra Section: sound Source: cdrtools Maintainer: Joerg Jaspert Depends: libc6 (>= 2.2.4-4) Suggests: vorbis-tools Architecture: i386 Filename: stable/backported-from-sarge/cdrtools/cdda2wav_2.0-1.99woody_i386.deb Size: 151600 Installed-size: 307 MD5sum: a8fb6aeb6bc14444da73e00ee0b1409a Description: Creates WAV files from audio CDs cdda2wav lets you digitally copy audio tracks from a CD-ROM, avoiding the distortion that is introduced when recording via a sound card. Data can be dumped into wav or sun format sound files. Options control the recording format (stereo/mono; 8/16 bits; sampling rate, etc). Package: cdrdao Version: 1:1.1.7-0.0.99woody Priority: extra Section: otherosfs Maintainer: Martin Mitchell Depends: libc6 (>= 2.2.4-4), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810) Suggests: gcdmaster Conflicts: suidmanager (<< 0.50) Architecture: i386 Filename: stable/backported-from-sarge/cdrdao/cdrdao_1.1.7-0.0.99woody_i386.deb Size: 299618 Installed-size: 768 MD5sum: 550880a1cc95194fbd0db482ef87c8d2 Description: Write audio or mixed mode CD-Rs in disk-at-once mode cdrdao creates audio or mixed mode CD-Rs in disk-at-once (DAO) mode driven by a description file. In DAO mode it is possible to create non standard track pre-gaps that have other lengths than 2 seconds and contain nonzero audio data. This is for example useful to divide live recordings into tracks where 2 second gaps would be irritating. It is also possible to create hidden tracks or track intros as found on commercial CDs. . This tool can produce audio and mixed mode CDs. Package: cdrecord Version: 4:2.0-1.99woody Priority: extra Section: otherosfs Source: cdrtools Maintainer: Joerg Jaspert Depends: libc6 (>= 2.2.4-4), debconf, makedev (>= 2.3.1-24) Recommends: mkisofs Suggests: xcdroast Architecture: i386 Filename: stable/backported-from-sarge/cdrtools/cdrecord_2.0-1.99woody_i386.deb Size: 467872 Installed-size: 821 MD5sum: 5d7ce21e358a6e9f5844d54a3e2d35c9 Description: A command line CD writing tool cdrecord allows you to create CDs on a CD recorder (SCSI or ATAPI). It supports writing data, audio, mixed, multi-session, and CD+ discs, on just about every type of CD recorder out there. Package: checkbot Version: 1.71-0.99woody Priority: optional Section: web Maintainer: Michael Alan Dorman Depends: perl, libhtml-parser-perl (>= 3.10), libmailtools-perl, libnet-perl, liburi-perl (>= 1.10), libwww-perl (>= 5.50) Architecture: all Filename: stable/backported-from-sarge/checkbot/checkbot_1.71-0.99woody_all.deb Size: 37916 Installed-size: 86 MD5sum: 838aefe31139d31c5f87ba75faafcf46 Description: a WWW link verifier Checkbot is a perl5 script which can verify links within a region of the World Wide Web. It checks all pages within an identified region, and all links within that region. After checking all links within the region, it will also check all links which point outside of the region, and then stop. Package: comerr-dev Version: 2.1-1.34+1.35-WIP-2003.08.21-2.99woody Priority: extra Section: libdevel Source: e2fsprogs (1.34+1.35-WIP-2003.08.21-2.99woody) Maintainer: Theodore Y. Ts'o Depends: libc6-dev | libc-dev, libcomerr2 Suggests: doc-base Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/comerr-dev_2.1-1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 38514 Installed-size: 122 MD5sum: 203c4b0da3773087320cdce90875c4a5 Description: The Common Error Description library - headers and static libraries libcom_err is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. . This package contains the development environment for the com_err library. Package: conserver-client Version: 7.2.2-0.99woody Priority: optional Section: non-free/comm Source: conserver Maintainer: Joergen Haegg Depends: libc6 (>= 2.2.4-4), debconf Architecture: i386 Filename: stable/backported-from-sarge/conserver/conserver-client_7.2.2-0.99woody_i386.deb Size: 31820 Installed-size: 75 MD5sum: cdb35394e3d3199f5690c006a6365b8b Description: connect to a console server This is the client to connect to a console server. Package: conserver-server Version: 7.2.2-0.99woody Priority: optional Section: non-free/comm Source: conserver Maintainer: Joergen Haegg Depends: libc6 (>= 2.2.4-4), libwrap0, debconf Architecture: i386 Filename: stable/backported-from-sarge/conserver/conserver-server_7.2.2-0.99woody_i386.deb Size: 79136 Installed-size: 176 MD5sum: fa63e0a6af3980f9b3deece5b976579f Description: connect multiple user to a serial console with logging Conserver is an application that allows multiple users to watch a serial console at the same time. It can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that conserver will log all your serial traffic so you can go back and review why something crashed, look at changes (if done on the console), or tie the console logs into a monitoring system (just watch the logfiles it creates). With multi-user capabilities you can work on equipment with others, mentor, train, etc. It also does all that client-server stuff so that, assuming you have a network connection, you can interact with any of the equipment from home or wherever. Package: dnsutils Version: 1:9.2.3-1.99woody Priority: standard Section: net Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libdns11, libisc7, liblwres1, libssl0.9.6, bind9-host | host Suggests: rblcheck Conflicts: netstd (<< 2.00) Replaces: bind, bind9 (<< 1:9.1.0-3) Architecture: i386 Filename: stable/backported-from-sarge/bind9/dnsutils_9.2.3-1.99woody_i386.deb Size: 148234 Installed-size: 244 MD5sum: dd1d09cc11188aec9a6bc1b2dc3715b8 Description: Clients provided with BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers various client programs related to DNS that are derived from the BIND source tree. Package: dosfstools Version: 2.10-0.99woody Priority: optional Section: otherosfs Maintainer: Roman Hodek Depends: libc6 (>= 2.2.4-4) Conflicts: mkdosfs Replaces: mkdosfs Architecture: i386 Filename: stable/backported-from-sarge/dosfstools/dosfstools_2.10-0.99woody_i386.deb Size: 48982 Installed-size: 104 MD5sum: 22932689c5bfabcfab3fb469cc5c0953 Description: Utilities to create and check MS-DOS FAT filesystems Inside of this package there are two utilities (mkdosfs alias mkfs.dos, and dosfsck alias fsck.msdos) to create and to check MS-DOS FAT filesystems on either hard disks or floppies under Linux. This version uses the enhanced boot sector/superblock format of DOS 3.3+ as well as provides a default dummy boot sector code. Package: dump Version: 0.4b40-0.99woody Priority: optional Section: utils Maintainer: Bdale Garbee Depends: e2fslibs, libblkid1, libc6 (>= 2.2.4-4), libcomerr2 (>= 1.33-3), libncurses5 (>= 5.2.20020112a-1), libreadline4 (>= 4.2a-4), libuuid1, debconf (>= 0.5.00) | debconf-2.0 Architecture: i386 Filename: stable/backported-from-sarge/dump/dump_0.4b40-0.99woody_i386.deb Size: 204088 Installed-size: 426 MD5sum: f9b35b5192a0958a4c1706a1fee422a8 Description: 4.4bsd dump and restore for ext2 filesystems Dump examines files on a filesystem and determines which files need to be backed up. These files are copied to the given disk, tape or other storage medium for safe keeping. . The restore command performs the inverse function of dump. A full backup of a file system may be restored and subsequent incremental backups layered on top of it. Single files and directory subtrees may be restored from full or partial backups. Package: dump Version: 0.4b34-0.99woody Priority: optional Section: utils Maintainer: Bdale Garbee Depends: e2fslibs, libbz2-1.0, libc6 (>= 2.2.4-4), libcomerr2 (>= 1.33-3), libncurses5 (>= 5.2.20020112a-1), libreadline4 (>= 4.2a-4), zlib1g (>= 1:1.1.4), debconf (>= 0.5.00) Architecture: i386 Filename: stable/backported-from-sarge/dump.old/dump_0.4b34-0.99woody_i386.deb Size: 134078 Installed-size: 272 MD5sum: ae70ade98d1c29a58f7a04de9504e1e3 Description: 4.4bsd dump and restore for ext2 filesystems Dump examines files on a filesystem and determines which files need to be backed up. These files are copied to the given disk, tape or other storage medium for safe keeping. . The restore command performs the inverse function of dump. A full backup of a file system may be restored and subsequent incremental backups layered on top of it. Single files and directory subtrees may be restored from full or partial backups. Package: dvd+rw-tools Version: 5.17.4.8.6-0.99woody Priority: optional Section: utils Maintainer: Keita Maehara Depends: libc6 (>= 2.2.4-4), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810), mkisofs Conflicts: dvdplusrw (<= 20020220.1) Replaces: dvdplusrw Architecture: i386 Filename: stable/backported-from-sarge/dvd+rw-tools/dvd+rw-tools_5.17.4.8.6-0.99woody_i386.deb Size: 95172 Installed-size: 280 MD5sum: ce282e4d0e9e50cf10c6a14bdfe1b616 Description: DVD+-RW/R tools This package includes a format utility for DVD+-RW media, a frontend to mkisofs for burning DVD+-RW/R and some associated tools. Package: dvdauthor Version: 0.6.9-0.99woody1 Priority: optional Section: otherosfs Maintainer: Marc Leeman Depends: libbz2-1.0, libc6 (>= 2.2.4-4), libdps1 (>> 4.1.0), libdvdread2, libfreetype6 (>= 2.1.1-1), libjpeg62, liblcms (>= 1.08-1), libmagick6, libpng2(>=1.0.12), libtiff3g, libxml2 (>= 2.6.5), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Architecture: i386 Filename: stable/backported-from-sarge/dvdauthor/dvdauthor_0.6.9-0.99woody1_i386.deb Size: 148982 Installed-size: 428 MD5sum: afd8e6ece0c64b6b739aec9225de4162 Description: create DVD-Video file system dvdauthor is a program that will generate a DVD movie from a valid mpeg2 stream that should play when you put it in a DVD player. Package: e2fsck-static Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: optional Section: admin Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: e2fsprogs (= 1.34+1.35-WIP-2003.08.21-2.99woody) Recommends: sash | zsh-static | busybox-static | zsh30-static Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/e2fsck-static_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 249360 Installed-size: 552 MD5sum: 938789d6d9d2c692ef01585f006ff490 Description: A statically-linked version of the ext2 filesystem checker This may be of some help to you if your filesystem gets corrupted enough to break the shared libraries used by the dynamically linked checker. . This binary takes much more space than its dynamic counterpart located in e2fsprogs, though. . You may want to install a statically-linked shell as well, to be able to run this program if something like your C library gets corrupted. Package: e2fslibs Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: libs Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6 (>= 2.2.4-4) Provides: libext2fs2, libe2p2 Replaces: e2fsprogs (<< 1.34-1) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/e2fslibs_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 65250 Installed-size: 134 MD5sum: 11f6302c742eeceba7c9c913515793ff Description: The EXT2 filesystem libraries The ext2fs and e2p libraries are used by programs that directly access EXT2 filesystems from usermode programs. The EXT2 filesystem is very often used as the default filesystem on Linux systems. Various system programs that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Package: e2fslibs-dev Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: extra Section: libdevel Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= 1.34+1.35-WIP-2003.08.21-2.99woody) Suggests: doc-base Provides: ext2fs-dev, e2p-dev Replaces: libkrb5-dev (<< 1.3) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/e2fslibs-dev_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 115864 Installed-size: 435 MD5sum: bb1395260fc4149e8e0074b2bb508821 Description: The EXT2 filesystem libraries - headers and static libraries The ext2fs and e2p libraries are used by programs that directly access EXT2 filesystems from usermode programs. The EXT2 filesystem is very often used as the default filesystem on Linux systems. Various system programs that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use libe2p include dumpe2fs, chattr, and lsattr. . This package contains the development environment for the ext2fs and e2p libraries. Package: e2fsprogs Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: base Essential: yes Maintainer: Theodore Y. Ts'o Pre-Depends: e2fslibs (= 1.34+1.35-WIP-2003.08.21-2.99woody), libblkid1 (>= 1.34-1), libc6 (>= 2.2.4-4), libcomerr2 (>= 1.34-1), libss2 (>= 1.34-1), libuuid1 (>= 1.34-1) Suggests: gpart, parted, e2fsck-static Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/e2fsprogs_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 424682 Installed-size: 936 MD5sum: 4608d45e7132d64182aa13d58bbac51c Description: The EXT2 file system utilities and libraries EXT2 stands for "Extended Filesystem", version 2. It's the main filesystem type used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining EXT2 filesystems, and the generic `fsck' wrapper. Package: evolution Version: 1.0.8-3.99woody1 Priority: optional Section: mail Maintainer: Takuo KITAME Depends: gtkhtml (>= 1.0.4), libcamel0 (= 1.0.8-3.99woody1), bonobo (>= 1.0.20), bonobo-conf (>= 0.14), gdk-imlib1, libart2 (>= 1.2.13-5), libaudiofile0 (>= 0.2.3-4), libbonobo-conf0 (>= 0.14), libbonobo2 (>= 1.0.20), libc6 (>= 2.2.4-4), libcamel0 (>= 1.0.8), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libfreetype6 (>= 2.1.1-1), libgal19 (>= 0.19.2), libgconf11 (>= 1.0.7), libgdk-pixbuf-gnome2 (>= 0.17.0-2woody2), libgdk-pixbuf2 (>= 0.17.0-2woody2), libglade-gnome0, libglade0, libglib1.2 (>= 1.2.0), libgnome-pilot1 (>= 0.1.63), libgnome-vfs0 (>= 1.0.5), libgnome32 (>= 1.2.13-5), libgnomeprint15 (>= 0.29-1), libgnomesupport0 (>= 1.2.13-5), libgnomeui32 (>= 1.2.13-5), libgtk1.2 (>= 1.2.10-4), libgtkhtml20 (>= 1.0.4), libjpeg62, libldap2 (>= 2.0.23-1), liboaf0 (>= 0.6.10), liborbit0 (>= 0.5.16), libpisock8, libpng2(>=1.0.12), libpopt0 (>= 1.6.2-1), libsasl7, libtiff3g, libungif4g (>= 4.1.0b1), libwrap0, libxml1 (>= 1:1.8.14-3), oaf (>= 0.6.10), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Recommends: mozilla-psm Suggests: gnupg, gnome-spell Conflicts: evolution-ssl, evolution-dev Provides: evolution-ssl, mail-reader, imap-client Replaces: evolution-ssl, evolution-dev Architecture: i386 Filename: stable/backported-from-sarge/evolution/evolution_1.0.8-3.99woody1_i386.deb Size: 8487004 Installed-size: 20702 MD5sum: 4319e7473c3950e3c66cb00a4ee28c40 Description: The groupware suite Evolution is the integrated mail, calendar and address book distributed suite from Ximian, Inc. . See http://www.ximian.com/products/ximian_evolution/index.html for more information. Package: exim4 Version: 4.34-9.99woody Priority: important Section: mail Maintainer: Exim4 Maintainers Depends: exim4-base (>= 4.34), exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom Architecture: all Filename: stable/backported-from-sarge/exim4/exim4_4.34-9.99woody_all.deb Size: 1426 Installed-size: 10 MD5sum: 774120b4e98137743b9c15a3438575d1 Description: An MTA (Mail Transport Agent) Exim (v4) is a fully featured MTA (Mail Transport Agent) that is rather easier to configure than smail or sendmail. It is a drop-in replacement for sendmail/mailq/rsmtp. . This metapackage provides the essential components for running an Exim (v4) MTA. Package: exim4-base Version: 4.34-9.99woody Priority: important Section: mail Source: exim4 Maintainer: Exim4 Maintainers Depends: libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), cron (>=3.0pl1-42), debconf (>= 0.5), exim4-config (>=4.30) | exim4-config-2, adduser, passwd (>=1:4.0.3-9) | passwd (<<1:4.0.3-1), netbase Suggests: mail-reader, eximon4, exim4-doc-html|exim4-doc-info Conflicts: exim, exim-tls, exim4-daemon-light (<<4.34), exim4-daemon-heavy (<<4.34), exim4-daemon-custom (<<4.34) Replaces: exim, exim-tls Architecture: i386 Filename: stable/backported-from-sarge/exim4/exim4-base_4.34-9.99woody_i386.deb Size: 789076 Installed-size: 1078 MD5sum: 469eea52af313eba55e559c2d9a06b4e Description: EXperimental Internal Mailer -- a Mail Transport Agent This MTA is rather easier to configure than smail or sendmail. It is a drop-in replacement for sendmail/mailq/rsmtp. Advanced features include the ability to reject connections from known spam sites, and an extremely efficient queue processing algorithm. . This package provides the support files, you need an additional package containing the main executable to make Exim work. The available packages are: . exim4-daemon-light exim4-daemon-heavy exim4-daemon-custom . Exim comes with very extensive documentation in /usr/share/doc/exim4-base/spec.txt.gz. Package: exim4-config Version: 4.34-9.99woody Priority: important Section: mail Source: exim4 Maintainer: Exim4 Maintainers Depends: debconf (>= 0.5), adduser, passwd (>=1:4.0.3-9) | passwd (<<1:4.0.3-1) Conflicts: exim, exim-tls, exim4-config, exim4-config-2, bash (<< 2.05), exim4-daemon-light (<<4.33), exim4-daemon-heavy (<<4.33), courier-mta, esmtp-run, masqmail, mta-dummy, nullmailer, postfix, postfix-snap, sendmail, sendmail-bin, smail, ssmtp, xmail, zmailer, zmailer-ssl Provides: exim4-config-2 Architecture: all Filename: stable/backported-from-sarge/exim4/exim4-config_4.34-9.99woody_all.deb Size: 208160 Installed-size: 538 MD5sum: 227fd3c2832ae3c1d87faf1888dc5841 Description: Debian configuration for exim4 This package provides the configuration for the exim4 daemon packages. The configuration framework has been split off the main package to allow sites to replace the configuration scheme with their own without having to change the actual exim packages. . Sites with special configuration needs (having a lot of identically configured machines for example) can use this to distribute their own custom configuration via the packaging system, using the magic available with dpkg's conffile handling, without having to do local changes on all of these machines. Package: exim4-daemon-heavy Version: 4.34-9.99woody Priority: optional Section: mail Source: exim4 Maintainer: Exim4 Maintainers Depends: exim4-base (>= 4.34), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libldap2 (>= 2.0.23-1), libmysqlclient10, libpam0g (>= 0.72-1), libpcre3, libperl5.6 (>= 5.6.1-8.8.0.0.1), libssl0.9.6 Conflicts: mail-transport-agent Provides: mail-transport-agent Replaces: mail-transport-agent Architecture: i386 Filename: stable/backported-from-sarge/exim4/exim4-daemon-heavy_4.34-9.99woody_i386.deb Size: 381298 Installed-size: 772 MD5sum: 0159e683c7173e45da2643b20576f5b6 Description: Exim (v4) with extended features, including exiscan-acl Exim (v4) is a fully featured MTA (Mail Transport Agent) that is rather easier to configure than smail or sendmail. It is a drop-in replacement for sendmail/mailq/rsmtp. . In addition to the features already supported by exim4-daemon-light this version of the Exim daemon includes extra features such as LDAP, PostgreSQL and MySQL data lookups, SPA SMTP authentication and embedded Perl interpreter. . This package features the exiscan-acl patch http://duncanthrax.net/exiscan-acl/ for integration of virus-scanners and spamassassin. Package: exim4-daemon-light Version: 4.34-9.99woody Priority: important Section: mail Source: exim4 Maintainer: Exim4 Maintainers Depends: exim4-base (>= 4.34), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libpcre3, libssl0.9.6 Conflicts: mail-transport-agent Provides: mail-transport-agent Replaces: mail-transport-agent Architecture: i386 Filename: stable/backported-from-sarge/exim4/exim4-daemon-light_4.34-9.99woody_i386.deb Size: 318332 Installed-size: 655 MD5sum: 37ed07e0485fde21fe078dd83642bb30 Description: Lightweight version of the Exim (v4) MTA Exim (v4) is a fully featured MTA (Mail Transport Agent) that is rather easier to configure than smail or sendmail. It is a drop-in replacement for sendmail/mailq/rsmtp. . This version of the Exim daemon has only basic features (including support for TLS encryption) enabled. It works well with the standard setups that are provided by Debian. Package: eximon4 Version: 4.34-9.99woody Priority: optional Section: mail Source: exim4 Maintainer: Exim4 Maintainers Depends: libc6 (>= 2.2.4-4), libpcre3, libxaw7 (>> 4.1.0), xlibs (>> 4.1.0), exim4-base (>= 4.10) Conflicts: eximon Replaces: eximon Architecture: i386 Filename: stable/backported-from-sarge/exim4/eximon4_4.34-9.99woody_i386.deb Size: 68960 Installed-size: 126 MD5sum: 93c5c910f574354a407d6a9d8b293c60 Description: X monitor for the Exim (v4) mail transport agent This allows administrators to view the Exim agent's mail queue and logs, and perform a variety of actions on queued messages, such as freezing, bouncing and thawing messages. Package: fbset Version: 2.1-8.99woody Priority: optional Section: base Maintainer: Guillem Jover Depends: libc6 (>= 2.2.4-4), debconf (>= 0.5), makedev (>= 2.3.1-24) | devfsd Architecture: i386 Filename: stable/backported-from-sarge/fbset/fbset_2.1-8.99woody_i386.deb Size: 74238 Installed-size: 152 MD5sum: 9d45536cb45ce0653ec57f9cb4262bac Description: Framebuffer device maintenance program Program to modify settings for the framebuffer devices (/dev/fb[0-9]* or /dev/fb/[0-9]*) on Linux, like depth, virtual resolution, timing parameters etc. . This program is useful for all Linux/m68k kernel versions, and for late 2.1 kernels and above on most other architectures. Package: gcdmaster Version: 1:1.1.7-0.0.99woody Priority: extra Section: otherosfs Source: cdrdao Maintainer: Martin Mitchell Depends: cdrdao, gdk-imlib1, libart2 (>= 1.2.13-5), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libglib1.2 (>= 1.2.0), libgnome32 (>= 1.2.13-5), libgnomemm9, libgnomesupport0 (>= 1.2.13-5), libgnomeui32 (>= 1.2.13-5), libgtk1.2 (>= 1.2.10-4), libgtkmm1.2, libsigc++0, libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810), xlibs (>> 4.1.0) Architecture: i386 Filename: stable/backported-from-sarge/cdrdao/gcdmaster_1.1.7-0.0.99woody_i386.deb Size: 486578 Installed-size: 1372 MD5sum: 6c27200ed6324800ff07ad6ccfa809e9 Description: Create audio CDs and write them in disk-at-once mode gcdmaster allows creation and editing of audio CD images in an easy to use GNOME environment. It can read audio CDs with jitter compensation for outstanding quality, add CD-TEXT and perform direct CD to CD copies. . gcdmaster is a graphical version of the cdrdao command-line utility. Package: gnome-pilot Version: 0.1.65-0.99woody Priority: extra Section: otherosfs Maintainer: Mike Markley Depends: gdk-imlib1, libart2 (>= 1.2.13-5), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libcapplet1 (>= 1:1.5.4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libgconf11 (>= 1.0.7), libglade-gnome0, libglade0, libglib1.2 (>= 1.2.0), libgnome-pilot1 (>= 0.1.63), libgnome-vfs0 (>= 1.0.5), libgnome32 (>= 1.2.13-5), libgnomesupport0 (>= 1.2.13-5), libgnomeui32 (>= 1.2.13-5), libgnorba27 (>= 1.2.13-5), libgtk1.2 (>= 1.2.10-4), libjpeg62, liboaf0 (>= 0.6.10), liborbit0 (>= 0.5.16), libpanel-applet0 (>= 1.4.0.2-3), libpisock8, libpisync0, libpng2(>=1.0.12), libpopt0 (>= 1.6.2-1), libtiff3g, libungif4g (>= 4.1.0b1), libwrap0, libxml1 (>= 1:1.8.14-3), oaf (>= 0.6.10), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Conflicts: libgnome-pilot0 (<= 0.1.51-2) Architecture: i386 Filename: stable/backported-from-sarge/gnome-pilot/gnome-pilot_0.1.65-0.99woody_i386.deb Size: 339142 Installed-size: 1100 MD5sum: 08f6e8b56c22dbc29c6c88e14b49988c Description: A GNOME applet for management of your Palm PDA gnome-pilot is a GNOME applet with a daemon that monitors for pilot connections from a serial port, XCopilot, etc. It features a conduit system and includes basic conduits for backing up, email, memos, etc. More conduits may be found in the gnome-pilot-conduits package. . Note that this has only been tested on a Palm III; any successes with other models would make for encouraging reports :). . gnome-pilot is not known to cause any data loss, but as the version number indicates, it is still deep in its first development stages. Please use it with caution. Package: gnome-pilot-conduits Version: 0.9-0.99woody Priority: extra Section: otherosfs Maintainer: Mike Markley Depends: gnome-pilot (>= 0.1.62), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libglib1.2 (>= 1.2.0), libgnome32 (>= 1.2.13-5), libgnomesupport0 (>= 1.2.13-5), libpisock8 Conflicts: gnome-pilot (<= 0.1.54-2) Replaces: libgnome-pilot0-dev (<= 0.1.54-2) Architecture: i386 Filename: stable/backported-from-sarge/gnome-pilot-conduits/gnome-pilot-conduits_0.9-0.99woody_i386.deb Size: 185936 Installed-size: 588 MD5sum: 5ae679d237d455450286594a5f06cdcb Description: Conduits for gnome-pilot This package contains conduits for the gnome-pilot Palm PDA applet. It adds expense, memo, time, email, and MAL (mobile application link) sync functionality to gnome-pilot. Package: gnome-pim Version: 1.4.8-1.99woody Priority: optional Section: utils Maintainer: Sebastian Rittau Depends: gdk-imlib1, libart2 (>= 1.2.13-5), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libglib1.2 (>= 1.2.0), libgnome32 (>= 1.2.13-5), libgnomesupport0 (>= 1.2.13-5), libgnomeui32 (>= 1.2.13-5), libgnorba27 (>= 1.2.13-5), libgtk1.2 (>= 1.2.10-4), libjpeg62, liborbit0 (>= 0.5.16), libpng2(>=1.0.12), libtiff3g, libungif4g (>= 4.1.0b1), libwrap0, xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Architecture: i386 Filename: stable/backported-from-sarge/gnome-pim/gnome-pim_1.4.8-1.99woody_i386.deb Size: 594398 Installed-size: 1781 MD5sum: 1114e29b44b3203fb8b34aec1b589c0e Description: Calendar and address book for GNOME. This package contains a calendar tool with notifications and multiple views, and an address book. . Gnome is the "GNU Network Object Model Environment" . It is a project to build a complete, user-friendly desktop based entirely on free software. Package: gnome-pim-conduits Version: 1.4.8-1.99woody Priority: extra Section: utils Source: gnome-pim Maintainer: Sebastian Rittau Depends: gnome-pim, gnome-pilot, libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libglib1.2 (>= 1.2.0), libgnome32 (>= 1.2.13-5), libgnomesupport0 (>= 1.2.13-5), libpisock8 Architecture: i386 Filename: stable/backported-from-sarge/gnome-pim/gnome-pim-conduits_1.4.8-1.99woody_i386.deb Size: 191030 Installed-size: 519 MD5sum: 05c74f2a041f394c71ae67f3ed7771df Description: Palm synchronization for calendar and address book. This package contains conduits to synchronize your address book and calendar between your GNOME system and your Palm. . GNOME is the "GNU Network Object Model Environment" . It is a project to build a complete, user-friendly desktop based entirely on free software. Package: hotplug Version: 0.0.20040329-15.99woody Priority: standard Section: admin Maintainer: Fumitoshi UKAI Depends: module-init-tools | modutils (>= 2.4.2), debconf (>= 0.2.26), procps, grep Recommends: ifupdown, usbutils, pciutils Suggests: ifrename Conflicts: usbmgr, alsa-base (<< 1.0.4-2) Replaces: usbmgr Architecture: all Filename: stable/backported-from-sarge/hotplug/hotplug_0.0.20040329-15.99woody_all.deb Size: 55832 Installed-size: 177 MD5sum: c4fe009f3b18c8861ae5ed87d4edb350 Description: Linux Hotplug Scripts This package contains the scripts necessary for hotplug Linux support, and lets you plug in new devices and use them immediately. It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices and can automatically configure network interfaces. Package: ifplugd Version: 0.25-0.99woody Priority: optional Section: net Maintainer: Oliver Kurth Depends: libc6 (>= 2.2.4-4), libdaemon0 (>= 0.6), debconf (>> 0.5) Recommends: ifupdown (>= 0.6.4-4.2) Architecture: i386 Filename: stable/backported-from-sarge/ifplugd/ifplugd_0.25-0.99woody_i386.deb Size: 48828 Installed-size: 130 MD5sum: 1e15a4e1bae525598c2dbe88ec8b2eac Description: A configuration daemon for ethernet devices ifplugd is a daemon which will automatically configure your ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled. This is useful on laptops with onboard network adapters, since it will only configure the interface when a cable is really connected. . Some features: * May beep when the cable is unplugged, plugged, the interface configuration succeeded or failed. * Syslog support * small * Multiple ethernet interface support * Support for wireless networking. Whenever an association to an AP is detected the network is configured. Have a look on waproamd if you need a facility to configure WEP keys before AP associations succeed. * Compatibility mode for network devices which do not support cable detection Package: ifrename Version: 27-0.99woody Priority: extra Section: net Source: wireless-tools Maintainer: Guus Sliepen Depends: libc6 (>= 2.2.4-4), libiw27 (>= 27) Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/ifrename_27-0.99woody_i386.deb Size: 41576 Installed-size: 65 MD5sum: b4ca21bb9c5b4a820153f389fdfcaf89 Description: Rename network interfaces based on various static criteria Ifrename allow the user to decide what name a network interface will have. Ifrename can use a variety of selectors to specify how interface names match the network interfaces on the system, the most common selector is the interface MAC address. Package: iftop Version: 0.16-0.99woody Priority: optional Section: net Maintainer: christophe barbe Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), libpcap0 (<< 0.7.0), libpcap0 (>= 0.6.1-1) Architecture: i386 Filename: stable/backported-from-sarge/iftop/iftop_0.16-0.99woody_i386.deb Size: 28016 Installed-size: 57 MD5sum: 4d061706b82e43298ffafd57e6992f70 Description: Display bandwidth usage on an interface iftop does for network usage what top(1) does for CPU usage. It listens to network traffic on a named interface and displays a table of current bandwidth usage by pairs of hosts. Handy for answering the question "why is our ADSL link so slow?". Package: ifupdown Version: 0.6.4-4.9.99woody Priority: important Section: net Maintainer: Anthony Towns Depends: net-tools, libc6 (>= 2.2.4-4), debconf (>= 0.5) Suggests: iproute, dhcp3-client | dhcp-client, ppp Conflicts: dhcp-client (= 3.0.1betaRC4-1) Replaces: netbase (<< 4.00) Architecture: i386 Filename: stable/backported-from-sarge/ifupdown/ifupdown_0.6.4-4.9.99woody_i386.deb Size: 45754 Installed-size: 111 MD5sum: df98dd9621b7a3d10ba91d9f4f982e47 Description: High level tools to configure network interfaces This package provides the tools ifup and ifdown which may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. Package: imagemagick Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: graphics Maintainer: Ryuichi Arafune Depends: libmagick6(=6:6.0.6.2-2.1.99woody) Suggests: gs, html2ps, lpr Conflicts: imagemagick-doc Replaces: imagemagick-doc, geomview (<= 1.8.0) Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/imagemagick_6.0.6.2-2.1.99woody_i386.deb Size: 1465860 Installed-size: 4673 MD5sum: ce1142559d2a74b21db50abe9fa04e6f Description: Image manipulation programs Imagemagick is a set of programs to manipulate various image formats (JPEG, TIFF, PhotoCD, PBM, XPM, etc...). All manipulations can be achieved through shell commands as well as through a X11 graphical interface (display). . Possible effects: colormap manipulation, channel operations, thumbnail creation, image annotation, limited drawing, image distortion, etc... . This package suggests a postscript interpreter (gs) to read postscript files. It will however function happily without it (as long as you don't want to read postscript). Package: iproute Version: 20010824-10.99woody Priority: optional Section: net Maintainer: Juan Cespedes Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/iproute/iproute_20010824-10.99woody_i386.deb Size: 508352 Installed-size: 677 MD5sum: 40ce7eb614f4c30312ea4b8631589aad Description: Professional tools to control the networking in Linux kernels This is `iproute', the professional set of tools to control the networking behavior in kernels 2.2.x and later. . At least, the options CONFIG_NETLINK and CONFIG_RTNETLINK must be compiled in the running kernel . This package is also known as iproute2 upstream and in some documentation. Package: jpilot Version: 0.99.2-cvs-20020810-1.99woody Priority: extra Section: otherosfs Maintainer: Ludovic Rousseau Depends: pilot-link (>= 0.9.5-pre5-1), libc6 (>= 2.2.4-4), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.10-4), libpisock8, libpng2(>=1.0.12), xlibs (>> 4.1.0) Recommends: jpilot-plugins Suggests: jpilot-syncmal, jpilot-mail Architecture: i386 Filename: stable/backported-from-sarge/jpilot/jpilot_0.99.2-cvs-20020810-1.99woody_i386.deb Size: 558660 Installed-size: 1226 MD5sum: 20e40a159235d9dd49a30898a6296d2e Description: A GTK app to modify the contents of your Palm Pilots DB's This is an impressive near-full-featured Palm Pilot desktop similar to the one that comes with the Pilot for Windows platforms. . You have access to the following applications: o Datebook o Address book o ToDo list o Memos . Plug-ins are available in the jpilot-plugins package. Package: jpilot-plugins Version: 0.99.2-cvs-20020810-1.99woody Priority: extra Section: otherosfs Source: jpilot Maintainer: Ludovic Rousseau Depends: libc6 (>= 2.2.4-4), libssl0.9.6, jpilot Architecture: i386 Filename: stable/backported-from-sarge/jpilot/jpilot-plugins_0.99.2-cvs-20020810-1.99woody_i386.deb Size: 32896 Installed-size: 84 MD5sum: 66c182f619790ea3f955de12181330ab Description: Plugins for jpilot (Palm Pilot desktop) This package includes three plugins for jpilot: o Expenses o SyncTime o KeyRing Package: libbind-dev Version: 1:9.2.3-1.99woody Priority: optional Section: libdevel Source: bind9 Maintainer: LaMont Jones Depends: libdns11 (= 1:9.2.3-1.99woody), libisc7 (= 1:9.2.3-1.99woody), libisccc0(= 1:9.2.3-1.99woody), libisccfg0 (= 1:9.2.3-1.99woody), liblwres1 (= 1:9.2.3-1.99woody) Conflicts: bind-dev Replaces: bind-dev Architecture: i386 Filename: stable/backported-from-sarge/bind9/libbind-dev_9.2.3-1.99woody_i386.deb Size: 896846 Installed-size: 2877 MD5sum: 65a7558ea865c1ec609ced8f7cb0a785 Description: Static Libraries and Headers used by BIND This package delivers archive-style libraries, header files, and API man pages for libbind, libdns, libisc, and liblwres. These are are only needed if you want to compile other packages that need more nameserver API than the resolver code provided in libc. Package: libblkid-dev Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: extra Section: libdevel Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6-dev | libc-dev, libblkid1 (= 1.34+1.35-WIP-2003.08.21-2.99woody) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/libblkid-dev_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 15814 Installed-size: 51 MD5sum: 59db0e97ef8c701747c02d5750c85530 Description: Block device id library - headers and static libraries The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This package contains the development environment for the blkid library. Package: libblkid1 Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: libs Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/libblkid1_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 33268 Installed-size: 65 MD5sum: d496c8ac7f50b89821a7d17659542957 Description: Block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. Package: libcamel-dev Version: 1.0.8-3.99woody1 Priority: optional Section: devel Source: evolution Maintainer: Takuo KITAME Depends: libcamel0 (= 1.0.8-3.99woody1) Conflicts: libcamel-ssl-dev Replaces: libcamel-ssl-dev Architecture: i386 Filename: stable/backported-from-sarge/evolution/libcamel-dev_1.0.8-3.99woody1_i386.deb Size: 592758 Installed-size: 1899 MD5sum: 2a044455fa9c92d45a6943ca4efc0a35 Description: generic messaging library -- development files camel development static libraries and header files. Package: libcamel0 Version: 1.0.8-3.99woody1 Priority: optional Section: libs Source: evolution Maintainer: Takuo KITAME Depends: gdk-imlib1, libart2 (>= 1.2.13-5), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libesd0 (>= 0.2.23-1) | libesd-alsa0 (>= 0.2.23-1), libfreetype6 (>= 2.1.1-1), libgal19 (>= 0.19.2), libgdk-pixbuf-gnome2 (>= 0.17.0-2woody2), libgdk-pixbuf2 (>= 0.17.0-2woody2), libglade-gnome0, libglade0, libglib1.2 (>= 1.2.0), libgnome32 (>= 1.2.13-5), libgnomeprint15 (>= 0.29-1), libgnomesupport0 (>= 1.2.13-5), libgnomeui32 (>= 1.2.13-5), libgtk1.2 (>= 1.2.10-4), libjpeg62, libpng2(>=1.0.12), libtiff3g, libungif4g (>= 4.1.0b1), libxml1 (>= 1:1.8.14-3), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4), libnss3 (>> 1.0.0), libnspr4 (>> 1.0.0) Conflicts: libcamel-ssl0 Replaces: libcamel-ssl0 Architecture: i386 Filename: stable/backported-from-sarge/evolution/libcamel0_1.0.8-3.99woody1_i386.deb Size: 477626 Installed-size: 1047 MD5sum: 7ecb1bdfb0b6f9a933f051ff29577d99 Description: A generic Messaging Library Camel will be a generic messaging library. It will eventually support the standard messaging system for receiving and sending messages. It aims at being the backend for the future gnome-mailer system. . The name "camel" stands for ... nothing. Open area of development there. You know, that "bazaar" thing. Maybe could we organize a big contest on gnome-list to find the best explanation :) . Camel draws heavily from JavaMail and the IMAP4rev1 RFC. People wanting to hack on a provider should read the JavaMail API specification, but CMC and MAPI are of interest too. Package: libcomerr2 Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: libs Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6 (>= 2.2.4-4) Provides: libcomerr-kth-compat Replaces: e2fsprogs (<< 1.34-1) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/libcomerr2_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 20900 Installed-size: 36 MD5sum: 61940caf2e07414fc788943798b12bd1 Description: The Common Error Description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Package: libdaemon-dev Version: 0.6-0.99woody Priority: optional Section: devel Source: libdaemon Maintainer: Oliver Kurth Depends: libdaemon0 (= 0.6-0.99woody) Architecture: i386 Filename: stable/backported-from-sarge/libdaemon/libdaemon-dev_0.6-0.99woody_i386.deb Size: 49964 Installed-size: 236 MD5sum: 86167523598e381b316d9557159066da Description: lightweight C library for daemons libdaemon is a leightweight C library which eases the writing of UNIX daemons. It consists of the following parts: * A wrapper around fork() which does the correct daemonization procedure of a process * A wrapper around syslog() for simpler and compatible log output to Syslog or STDERR * An API for writing PID files * An API for serializing UNIX signals into a pipe for usage with select() or poll() . Routines like these are included in most of the daemon software available. It is not that simple to get it done right and code duplication cannot be a goal. . This package includes the header files and the static version of the library and documentation. Package: libdaemon0 Version: 0.6-0.99woody Priority: optional Section: libs Source: libdaemon Maintainer: Oliver Kurth Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/libdaemon/libdaemon0_0.6-0.99woody_i386.deb Size: 9212 Installed-size: 30 MD5sum: b7273e8baf10d25feb1e0027fbb81511 Description: lightweight C library for daemons libdaemon is a leightweight C library which eases the writing of UNIX daemons. It consists of the following parts: * A wrapper around fork() which does the correct daemonization procedure of a process * A wrapper around syslog() for simpler and compatible log output to Syslog or STDERR * An API for writing PID files * An API for serializing UNIX signals into a pipe for usage with select() or poll() . Routines like these are included in most of the daemon software available. It is not that simple to get it done right and code duplication cannot be a goal. . This package includes the run time library. Package: libdns11 Version: 1:9.2.3-1.99woody Priority: standard Section: libs Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libisc7, libssl0.9.6 Conflicts: libbind0 Replaces: libbind0 Architecture: i386 Filename: stable/backported-from-sarge/bind9/libdns11_9.2.3-1.99woody_i386.deb Size: 407136 Installed-size: 1033 MD5sum: 057eba0b81433ac225a51f41b9b9a086 Description: DNS Shared Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libdns shared library used by BIND's daemons and clients. Package: libgnome-pilot1 Version: 0.1.65-0.99woody Priority: optional Section: libs Source: gnome-pilot Maintainer: Mike Markley Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/gnome-pilot/libgnome-pilot1_0.1.65-0.99woody_i386.deb Size: 94028 Installed-size: 276 MD5sum: eba8dbb502cd2aa87cc58a92b1313f2b Description: Support libraries for gnome-pilot This package contains a set of shared libraries required for proper operation of the gnome-pilot package. They can also be useful for other programs written using gnome-pilot's framework. Package: libgnome-pilot1-dev Version: 0.1.65-0.99woody Priority: optional Section: devel Source: gnome-pilot Maintainer: Mike Markley Depends: libgnome-pilot1 (= 0.1.65-0.99woody), libc6-dev Conflicts: libgnome-pilot-dev Provides: libgnome-pilot-dev Architecture: i386 Filename: stable/backported-from-sarge/gnome-pilot/libgnome-pilot1-dev_0.1.65-0.99woody_i386.deb Size: 127456 Installed-size: 511 MD5sum: 3e778edb4f461db7a5b56c36765eaadf Description: Development libraries for gnome-pilot This package contains a set of libraries that can be used to build gnome-pilot or other programs written using its framework. Package: libisc7 Version: 1:9.2.3-1.99woody Priority: standard Section: libs Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4) Conflicts: libbind0 Replaces: libbind0 Architecture: i386 Filename: stable/backported-from-sarge/bind9/libisc7_9.2.3-1.99woody_i386.deb Size: 138920 Installed-size: 271 MD5sum: c14b5a288627366a2f8611eff2dc01d3 Description: ISC Shared Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libisc shared library used by BIND's daemons and clients. Package: libisccc0 Version: 1:9.2.3-1.99woody Priority: optional Section: libs Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libisc7 Conflicts: libbind0 Replaces: libbind0 Architecture: i386 Filename: stable/backported-from-sarge/bind9/libisccc0_9.2.3-1.99woody_i386.deb Size: 71386 Installed-size: 94 MD5sum: f88e29bf68a6006681a60aeb22c15cc4 Description: Command Channel Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libisccc shared library used by BIND's daemons and clients, particularly rndc. Package: libisccfg0 Version: 1:9.2.3-1.99woody Priority: optional Section: libs Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libdns11, libisc7, libisccc0 Conflicts: libbind0 Replaces: libbind0 Architecture: i386 Filename: stable/backported-from-sarge/bind9/libisccfg0_9.2.3-1.99woody_i386.deb Size: 82792 Installed-size: 125 MD5sum: da921d8933f109471a8af546787a86b1 Description: Config File Handling Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libisccfg shared library used by BIND's daemons and clients to read and write ISC-style configuration files like named.conf and rndc.conf. Package: libiw-dev Version: 27-0.99woody Priority: extra Section: libdevel Source: wireless-tools Maintainer: Guus Sliepen Depends: libiw27 (= 27-0.99woody), libc6-dev Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/libiw-dev_27-0.99woody_i386.deb Size: 40220 Installed-size: 97 MD5sum: af207ce33edd37b6b73d9189a6694121 Description: Wireless tools - development files Wireless tools are used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This package contains the header files and static version of libiw. Package: libiw27 Version: 27-0.99woody Priority: extra Section: libs Source: wireless-tools Maintainer: Guus Sliepen Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/libiw27_27-0.99woody_i386.deb Size: 26150 Installed-size: 49 MD5sum: 45858262a382d093f3f4ed6660bffdb6 Description: Wireless tools - library Wireless tools are used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This package contains the dynamic library libiw. Package: libiw27-udeb Version: 27-0.99woody Priority: extra Section: debian-installer Source: wireless-tools Maintainer: Guus Sliepen Provides: libiw27 Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/libiw27-udeb_27-0.99woody_i386.deb Size: 25144 Installed-size: 45 MD5sum: 4ab10a7f4ad79c658ac97149b2f122b3 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: liblwres1 Version: 1:9.2.3-1.99woody Priority: standard Section: libs Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4) Conflicts: libbind0 Replaces: libbind0 Architecture: i386 Filename: stable/backported-from-sarge/bind9/liblwres1_9.2.3-1.99woody_i386.deb Size: 84366 Installed-size: 123 MD5sum: ed939243031293fc445ab2476454effa Description: Lightweight Resolver Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the liblwres shared library used by BIND's daemons and clients. Package: libmagick++6 Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: libs Source: imagemagick Maintainer: Ryuichi Arafune Pre-Depends: dpkg (>=1.6.8) Depends: libc6 (>= 2.2.4-4), libfreetype6 (>= 2.1.1-1), libmagick6, libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810) Conflicts: libmagick5g++, libmagick++0, libmagick++4 (>=4:5.5.1), libmagick++5.5.3, libmagick++6.0.1 Replaces: libmagick5g++, libmagick++0, libmagick++5 (>=4:5.5.1), libmagick++6.0.1 Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/libmagick++6_6.0.6.2-2.1.99woody_i386.deb Size: 191222 Installed-size: 722 MD5sum: 270d3e51cb449949416ea28037259e82 Description: The object-oriented C++ API to the ImageMagick library Magick++ supports an object model which is inspired by PerlMagick. Magick++ executes faster than PerlMagick since it is accessed from a compiled language rather than from a scripting language. This makes it more suitable for Web CGI programs which must start-up and execute quickly. Images support implicit reference counting so that copy constructors and assignment incur almost no cost. The cost of actually copying an image (if necessary) is done just before modification and this copy is managed automatically by Magick++. De-referenced copies are automatically deleted. The image objects support value (rather than pointer) semantics so it is trivial to support multiple generations of an image in memory at one time. . Magick++ provides integrated support for STL. This support allows Magick++ to be used with the Standard Template Library (STL) so that the powerful containers available (e.g. deque, vector, list, and map) can be used to write programs similar to those possible with PERL & PerlMagick. STL-compatible template versions of ImageMagick's list-style operations are provided so that operations may be performed on multiple images stored in STL containers. Package: libmagick++6-dev Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: libdevel Source: imagemagick Maintainer: Ryuichi Arafune Depends: libmagick++6(=6:6.0.6.2-2.1.99woody), libmagick6-dev(=6:6.0.6.2-2.1.99woody) Conflicts: libmagick++0-dev, libmagick++5.5.1 (<= 4:5.5.1.4-1), libmagick++5, libmagick++-dev, imagemagick(<= 5:6.0.1.2-1) Replaces: libmagick++0-dev, libmagick++5.5.1 (<= 4:5.5.1.4-1), libmagick++-dev, imagemagick (<= 5:6.0.1.2-1) Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/libmagick++6-dev_6.0.6.2-2.1.99woody_i386.deb Size: 295456 Installed-size: 1506 MD5sum: 54f744a71f8cdc7479574e4c3a188830 Description: The object-oriented C++ API to the ImageMagick library--development This are the include files and static libraries needed to compile programs using libMagick++. Package: libmagick6 Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: libs Source: imagemagick Maintainer: Ryuichi Arafune Pre-Depends: dpkg (>= 1.6.8) Depends: libbz2-1.0, libc6 (>= 2.2.4-4), libdps1 (>> 4.1.0), libfreetype6 (>= 2.1.1-1), libjpeg62, liblcms (>= 1.08-1), libpng2(>=1.0.12), libtiff3g, libxml2 (>= 2.6.5), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Conflicts: libmagick, libmagick-lzw, libmagick5g, imagemagick (<=5:6.0.1.2-1), libmagick5 (>= 4:5.5.1-1 ), libmagick6.0.1 Replaces: libmagick, libmagick-lzw, libmagick5g, imagemagick (<=5:6.0.1.2-1), libmagick5 (>= 4:5.5.1) Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/libmagick6_6.0.6.2-2.1.99woody_i386.deb Size: 1084442 Installed-size: 3650 MD5sum: c07bf028e2f0da6729c7db1034d03a98 Description: Image manipulation library LibMagick supports loading and saving a very large set of image formats. It allows a lot of image manipulation as well. Package: libmagick6-dev Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: libdevel Source: imagemagick Maintainer: Ryuichi Arafune Depends: libmagick6(=6:6.0.6.2-2.1.99woody), libjpeg62-dev, libbz2-dev, libfreetype6-dev,libtiff3g-dev, libc6-dev, libz-dev, libpng2-dev, xlibs-dev, libxml2-dev, libwmf-dev, liblcms-dev, libexif-dev, libdps-dev Conflicts: imagemagick-dev, libmagick5.5.1 (<= 5:5.5.1.4-1), libmagick-dev Replaces: imagemagick (<= 5:6.0.1.2-1), libmagick5.5.1 (<= 4:5.5.1.4-1), libmagick5 Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/libmagick6-dev_6.0.6.2-2.1.99woody_i386.deb Size: 1319054 Installed-size: 4653 MD5sum: eb980538a082c2a3cc35dd59e50994b4 Description: Image manipulation library -- development This package includes header files and static libraries needed to compile programs using libMagick. Package: libpda-pilot-perl Version: 0.11.3-2.99woody1 Priority: extra Section: devel Source: pilot-link Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpisock8, perlapi-5.6.1, perl (>= 5.6.1-7), libdigest-md5-perl, data-dumper Conflicts: pilot-link-perl Provides: pilot-link-perl Replaces: pilot-link (<< 0.9.3-1), pilot-link-perl Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/libpda-pilot-perl_0.11.3-2.99woody1_i386.deb Size: 55856 Installed-size: 188 MD5sum: f532178b5458ad7ccaee8584b414b310 Description: Perl tools to communicate with a PalmOS PDA over a serial port This package provides the PDA::Pilot module, which provides Perl programs with a means of communicating directly with a PalmOS device. Package: libpisock++0 Version: 0.11.3-2.99woody1 Priority: optional Section: libs Source: pilot-link Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpisock8, libpng2(>=1.0.12) Conflicts: libpisock5 (<= 0.10.99-4) Replaces: libpisock5 (<= 0.10.99-4) Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/libpisock++0_0.11.3-2.99woody1_i386.deb Size: 31984 Installed-size: 85 MD5sum: 53eca065bbe2ba85e6133c2346ab17a8 Description: C++ libraries for communicating with a PalmOS PDA libpisock++ contains libraries used by pilot-link and other packages that want to communicate with a PalmOS device. Package: libpisock-dev Version: 0.11.3-2.99woody1 Priority: extra Section: devel Source: pilot-link Maintainer: Ben Darnell Depends: libpisock8, libpisock++0, libpisync0 Conflicts: libpisock3 (<= 0.9.5-pre5-1.1) Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/libpisock-dev_0.11.3-2.99woody1_i386.deb Size: 102718 Installed-size: 351 MD5sum: 2beb42cabb402e8f1ea0d67488df5e31 Description: Development files for communicating with a PalmOS PDA libpisockdev contains static libraries and header files for writing applications that want to communicate with a PalmOS device. Package: libpisock8 Version: 0.11.3-2.99woody1 Priority: optional Section: libs Source: pilot-link Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpng2(>=1.0.12) Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/libpisock8_0.11.3-2.99woody1_i386.deb Size: 59996 Installed-size: 146 MD5sum: c42fe28da2159eca6952195d83bc79f6 Description: Libraries for communicating with a PalmOS PDA libpisock contains libraries used by pilot-link and any other packages that want to communicate with a PalmOS device. Package: libpisync0 Version: 0.11.3-2.99woody1 Priority: optional Section: libs Source: pilot-link Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpng2(>=1.0.12) Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/libpisync0_0.11.3-2.99woody1_i386.deb Size: 10262 Installed-size: 25 MD5sum: 6ebc666434dd002260cba5de560a2899 Description: Synchronization library for PalmOS devices libpisync is a framework for applications to synchronize data with PalmOS devices. Package: libsane Version: 1.0.10-1.99woody2 Priority: optional Section: libs Source: sane-backends Maintainer: Julien BLACHE Depends: debconf (>= 0.2.17), makedev, libc6 (>= 2.2.4-4), libjpeg62 Recommends: sane-utils (>= 1.0.10-1.99woody2) Suggests: libsane-extras (>> 1.0.10.1) Conflicts: sane (<< 1.0.4), sane-gimp1.1 (<< 1.0.4), libusb0 Replaces: libsane-extras (<< 1.0.10-1) Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/libsane_1.0.10-1.99woody2_i386.deb Size: 1826616 Installed-size: 4457 MD5sum: 0730af3cb05de02b0ed0080bcc010105 Description: API library for scanners SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package includes the backends for many scanners. A libsane-extras package containing some not-yet-included backends is available separately. . Graphical frontends for sane are available in the packages sane and xsane. Command line frontend scanimage, saned and sane-find-scanner are available in the sane-utils package. Package: libsane Version: 1.0.10-1.99woody1 Priority: optional Section: libs Source: sane-backends Maintainer: Julien BLACHE Depends: debconf (>= 0.2.17), makedev, libc6 (>= 2.2.4-4), libjpeg62 Recommends: sane-utils (>= 1.0.10-1.99woody1) Suggests: libsane-extras (>> 1.0.10.1) Conflicts: sane (<< 1.0.4), sane-gimp1.1 (<< 1.0.4), libusb0 Replaces: libsane-extras (<< 1.0.10-1) Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/libsane_1.0.10-1.99woody1_i386.deb Size: 1826472 Installed-size: 4457 MD5sum: 2e9b56c4d704f79f801de077f5e82292 Description: API library for scanners SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package includes the backends for many scanners. A libsane-extras package containing some not-yet-included backends is available separately. . Graphical frontends for sane are available in the packages sane and xsane. Command line frontend scanimage, saned and sane-find-scanner are available in the sane-utils package. Package: libsane-dev Version: 1.0.10-1.99woody2 Priority: optional Section: devel Source: sane-backends Maintainer: Julien BLACHE Depends: libsane (= 1.0.10-1.99woody2), libusb-dev, libjpeg62-dev, libltdl3-dev Suggests: libsane-extras-dev (>> 1.0.10.1) Replaces: libsane-extras-dev (<< 1.0.10.1) Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/libsane-dev_1.0.10-1.99woody2_i386.deb Size: 1507368 Installed-size: 4036 MD5sum: e6ffe0a4436796182de272496b74eebe Description: API development library for scanners [development files] SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package contains the files needed to build your applications using SANE. Package: libsane-dev Version: 1.0.10-1.99woody1 Priority: optional Section: devel Source: sane-backends Maintainer: Julien BLACHE Depends: libsane (= 1.0.10-1.99woody1), libusb-dev, libjpeg62-dev, libltdl3-dev Suggests: libsane-extras-dev (>> 1.0.10.1) Replaces: libsane-extras-dev (<< 1.0.10.1) Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/libsane-dev_1.0.10-1.99woody1_i386.deb Size: 1507286 Installed-size: 4036 MD5sum: 5e03e2faeca1ba9fccf8be6c96024acd Description: API development library for scanners [development files] SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package contains the files needed to build your applications using SANE. Package: libss2 Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: libs Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libcomerr2 Replaces: e2fsprogs (<< 1.34-1) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/libss2_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 26478 Installed-size: 49 MD5sum: 58cd5dec9828ff9ed6a76e77d5900c05 Description: Command-line interface parsing library This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. Package: libuuid1 Version: 1.34+1.35-WIP-2003.08.21-2.99woody Priority: required Section: libs Source: e2fsprogs Maintainer: Theodore Y. Ts'o Depends: libc6 (>= 2.2.4-4) Replaces: e2fsprogs (<< 1.34-1) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/libuuid1_1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 24890 Installed-size: 46 MD5sum: b402eb9ec7e6a884e8a8d33d33b97c03 Description: Universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. Package: libxml2 Version: 2.6.5-0.99woody Priority: optional Section: libs Maintainer: Mike Hommey Depends: libc6 (>= 2.2.4-4), zlib1g (>= 1:1.1.4) Architecture: i386 Filename: stable/backported-from-sarge/libxml2/libxml2_2.6.5-0.99woody_i386.deb Size: 576570 Installed-size: 1097 MD5sum: 244fecb4aaadee4e010d79997c88ab92 Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. Package: libxml2-dev Version: 2.6.5-0.99woody Priority: optional Section: libdevel Source: libxml2 Maintainer: Mike Hommey Depends: libxml2 (= 2.6.5-0.99woody), libz-dev Replaces: libxml2 (<= 2.4.19-1) Architecture: i386 Filename: stable/backported-from-sarge/libxml2/libxml2-dev_2.6.5-0.99woody_i386.deb Size: 1464400 Installed-size: 6574 MD5sum: 10586019c88336f504771eedf5e1e518 Description: Development files for the GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . Install this package if you wish to develop your own programs using the GNOME XML library. Package: libxml2-python2.1 Version: 2.6.5-0.99woody Priority: optional Section: python Source: libxml2 Maintainer: Mike Hommey Depends: libc6 (>= 2.2.4-4), libxml2 (>= 2.6.5), python2.1 Architecture: i386 Filename: stable/backported-from-sarge/libxml2/libxml2-python2.1_2.6.5-0.99woody_i386.deb Size: 436762 Installed-size: 1157 MD5sum: 6191e3d9961faf927f20d9483a6a18cc Description: Python 2.1 bindings for libxml2 This package contains the files needed to use libxml2 in Python programs. Package: libxml2-utils Version: 2.6.5-0.99woody Priority: optional Section: text Source: libxml2 Maintainer: Mike Hommey Depends: libc6 (>= 2.2.4-4), libxml2 (>= 2.6.5), zlib1g (>= 1:1.1.4) Conflicts: libxml2 (<< 2.5.7-1) Replaces: libxml2 (<< 2.5.7-1) Architecture: i386 Filename: stable/backported-from-sarge/libxml2/libxml2-utils_2.6.5-0.99woody_i386.deb Size: 238608 Installed-size: 276 MD5sum: 5cfeace995444dba08164816c8620050 Description: XML utilities This package provides xmllint, a tool for validating and reformatting XML documents, and xmlcatalog, a tool to parse and manipulate XML or SGML catalog files. Package: lvm10 Version: 1:1.0.7-0.99woody1 Priority: optional Section: admin Maintainer: Patrick Caulfield Depends: libc6 (>= 2.2.4-4), lvm-common (>> 1.0), file, debconf (>=1.0.0) Suggests: kernel-image-2.4, devfsd Conflicts: lvm (<< 1:0), lvm2 Provides: lvm-binaries Architecture: i386 Filename: stable/backported-from-sarge/lvm10/lvm10_1.0.7-0.99woody1_i386.deb Size: 1898398 Installed-size: 5582 MD5sum: 3bd1e3a65281624de16f82f989371e8d Description: The Logical Volume Manager for Linux LVM includes all of the support for handling read/write operations on physical volumes (hard disks, RAID-Systems, magneto optical, etc., multiple devices (MD), see mdadd(8) or even loop devices, see losetup(8)), creating volume groups from one or more physical volumes and creating one or more logical volumes in volume groups. . This provides the IO protocol version 10 compatible binaries (LVM 0.9.x/1.0.x) for Linux 2.4 kernel or a patched 2.2 kernel. Package: lwresd Version: 1:9.2.3-1.99woody Priority: optional Section: net Source: bind9 Maintainer: LaMont Jones Depends: libc6 (>= 2.2.4-4), libdns11, libisc7, libisccc0, libisccfg0, liblwres1, libssl0.9.6 Recommends: libnss-lwres Architecture: i386 Filename: stable/backported-from-sarge/bind9/lwresd_9.2.3-1.99woody_i386.deb Size: 165940 Installed-size: 321 MD5sum: 1b434d29d614869cec8c10027b28a383 Description: Lightweight Resolver Daemon lwresd is the daemon providing name lookup services to clients that use the BIND 9 lightweight resolver library. It is essentially a stripped- down, caching-only name server that answers queries using the BIND 9 lightweight resolver protocol rather than the DNS protocol. Package: man2html Version: 1.5-25.99woody Priority: optional Section: doc Maintainer: Robert Luberda Depends: libc6 (>= 2.2.4-4), gawk, man-db, debianutils (>= 1.6) Recommends: httpd Suggests: manpages, manpages-dev, swish++ Architecture: i386 Filename: stable/backported-from-sarge/man2html/man2html_1.5-25.99woody_i386.deb Size: 79970 Installed-size: 184 MD5sum: 69e79ce94269dfd5caacdda73adae0ca Description: Turns a web-browser and an httpd-server into a man pager Point your web browser at http://your.site/cgi-bin/man2html and you got your manpages in the browser. . Features: * Fast C CGI program for man/BSD-mandoc to HTML conversion. * Works from the unformatted nroff/troff source. * Source may be compressed. * Does tbl tables (but not eqn equations). * Generates hypertext links to foobar(1), abc@host, and xyzzy.h files * CGI script for whatis-based alpha-indexes by section. * CGI script for name-only alpha-indexes by section. * CGI script for full text search (requires swish++) * Front-end script to talk to a pre-launched netscape. . http://users.actrix.gen.nz/michael/vhman2html.html Package: mkisofs Version: 4:2.0-1.99woody Priority: extra Section: otherosfs Source: cdrtools Maintainer: Joerg Jaspert Depends: libc6 (>= 2.2.4-4), zlib1g (>= 1:1.1.4) Suggests: cdrecord Conflicts: mkhybrid Architecture: i386 Filename: stable/backported-from-sarge/cdrtools/mkisofs_2.0-1.99woody_i386.deb Size: 297004 Installed-size: 778 MD5sum: 2b4ed101f900e5eae369289583b5dd6b Description: Creates ISO-9660 CD-ROM filesystem images. mkisofs is a pre-mastering program for creating ISO-9660 CD-ROM filesystem images, which can then be written to a CD-ROM using the cdrecord program. mkisofs now includes support for making bootable "El Torito" CD-ROMs, as well as CD-ROMs with support for the Macintosh HFS filesystem. . Includes tools needed to create compressed isofs images (mkzftree from zisofs_tools source). Package: mount Version: 2.12h-2.99woody1 Priority: required Section: base Source: util-linux Essential: yes Maintainer: LaMont Jones Pre-Depends: libblkid1, libc6 (>= 2.2.4-4), libuuid1 Architecture: i386 Filename: stable/backported-from-sarge/util-linux/mount_2.12h-2.99woody1_i386.deb Size: 127276 Installed-size: 231 MD5sum: 565737f99f19e1607ccd7e016aff5b44 Description: Tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Package: mount Version: 2.12h-2.99woody Priority: required Section: base Source: util-linux Essential: yes Maintainer: LaMont Jones Pre-Depends: libblkid1, libc6 (>= 2.2.4-4), libuuid1 Architecture: i386 Filename: stable/backported-from-sarge/util-linux.old/mount_2.12h-2.99woody_i386.deb Size: 127206 Installed-size: 231 MD5sum: 1b249deb6b6edf5be7250a19271dd167 Description: Tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Package: nasm Version: 0.98.38-1.0.99woody Priority: optional Section: devel Maintainer: Christian Kesselheim Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/nasm/nasm_0.98.38-1.0.99woody_i386.deb Size: 1555708 Installed-size: 2575 MD5sum: 1fc6365099967de95367eedfdcb046c6 Description: General-purpose x86 assembler Netwide Assembler. NASM will currently output flat-form binary files, a.out, COFF and ELF Unix object files, and Microsoft 16-bit DOS and Win32 object files. . Also included is NDISASM, a prototype x86 binary-file disassembler which uses the same instruction table as NASM. . NASM is released under the GNU Lesser General Public License (LGPL). Package: perlmagick Version: 6:6.0.6.2-2.1.99woody Priority: optional Section: perl Source: imagemagick Maintainer: Ryuichi Arafune Depends: perlapi-5.6.1, perl (>= 5.6.1-8.9.0.0.1), libbz2-1.0, libc6 (>= 2.2.4-4), libdps1 (>> 4.1.0), libfreetype6 (>= 2.1.1-1), libjpeg62, liblcms (>= 1.08-1), libmagick6, libpng2(>=1.0.12), libtiff3g, libxml2 (>= 2.6.5), xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Architecture: i386 Filename: stable/backported-from-sarge/imagemagick/perlmagick_6.0.6.2-2.1.99woody_i386.deb Size: 128850 Installed-size: 296 MD5sum: 19e6b47f17a10c49345398ef74b8ef55 Description: A perl interface to the libMagick graphics routines PerlMagick is a perl module which gives you all the functionality you can enjoy in the imagemagick package binaries, from perl. . One can load several images with perlmagick, apply numerous transformations and operations on the images and write them back, possibly in a different format. Package: pilot-link Version: 0.11.3-2.99woody1 Priority: optional Section: otherosfs Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpisock++0, libpisock8, libpng2(>=1.0.12), libreadline4 (>= 4.2a-4), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810), debconf Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/pilot-link_0.11.3-2.99woody1_i386.deb Size: 289722 Installed-size: 635 MD5sum: 2622fc59ed3fa55ce50b2ea6bee949e6 Description: Tools to communicate with a PalmOS PDA over a serial port pilot-link is a set of tools that communicate with a PalmOS PDA. Package: python-pisock Version: 0.11.3-2.99woody1 Priority: extra Section: devel Source: pilot-link Maintainer: Ben Darnell Depends: libc6 (>= 2.2.4-4), libpisock8, python (>= 2.1), python (<< 2.2) Conflicts: pilot-link-python Provides: pilot-link-python Replaces: pilot-link (<< 0.9.3-1), pilot-link-python Architecture: i386 Filename: stable/backported-from-sarge/pilot-link/python-pisock_0.11.3-2.99woody1_i386.deb Size: 25716 Installed-size: 73 MD5sum: 6c302ba71ca5e6b56a442d458b11fcd9 Description: Python tools to communicate with PalmOS PDA over a serial port This package provides the pisock module, which provides Python programs with a means of communicating directly with a PalmOS device. Package: quota Version: 3.09-4.99woody Priority: optional Section: admin Maintainer: Michael Meskes Depends: e2fslibs, libc6 (>= 2.2.4-4), libcomerr2 (>= 1.33-3), libwrap0, debconf Architecture: i386 Filename: stable/backported-from-sarge/quota/quota_3.09-4.99woody_i386.deb Size: 373912 Installed-size: 752 MD5sum: ddebd9694d44daf6ddca88dd16933d89 Description: An implementation of the disk quota system QUOTA is implemented using the BSD system call interface as the means of communication with the user level. This is based on the Melbourne quota system which uses both user and group quota files. Package: sane Version: 1.0.10-0.99woody Priority: optional Section: graphics Source: sane-frontends Maintainer: Julien BLACHE Depends: libc6 (>= 2.2.4-4), libgimp1.2 (>= 1.2.0), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.10-4), libjpeg62, libsane (>= 1.0.9-3), xlibs (>> 4.1.0) Suggests: gimp1.2 Replaces: sane-gimp1.2 Architecture: i386 Filename: stable/backported-from-sarge/sane-frontends/sane_1.0.10-0.99woody_i386.deb Size: 88784 Installed-size: 188 MD5sum: cc9bd1d8fcfb3fa09aeb7c5ca98c8869 Description: Scanner graphical frontends This package includes : o xscanimage, a scanner graphical frontend with GIMP 1.2 support o scanadf, a command-line frontend for scanners with Automatic Document Feeder o xcam, for acquiring images continuously from cameras. . An alternative to xscanimage called xsane is packaged separately. . The scanner frontends use SANE. SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). Package: sane-gimp1.2 Version: 1.0.10-0.99woody Priority: optional Section: graphics Source: sane-frontends Maintainer: Julien BLACHE Depends: sane (>= 1.0.10) Architecture: i386 Filename: stable/backported-from-sarge/sane-frontends/sane-gimp1.2_1.0.10-0.99woody_i386.deb Size: 11850 Installed-size: 20 MD5sum: b3357f4a77bef69586fdbd998ea9de1f Description: [dummy] Scanner graphical frontends -- GIMP 1.2 flavour This package is a dummy package depending on sane (>= 1.0.10-1). . As of version 1.0.10-1, the sane-gimp1.2 package no longer exists, and the sane package is built with GIMP 1.2 support. . You can safely remove this package. Package: sane-utils Version: 1.0.10-1.99woody2 Priority: optional Section: graphics Source: sane-backends Maintainer: Julien BLACHE Depends: adduser, libc6 (>= 2.2.4-4), libjpeg62, libsane (>= 1.0.9-3) Replaces: libsane Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/sane-utils_1.0.10-1.99woody2_i386.deb Size: 79438 Installed-size: 154 MD5sum: 19b5a636e62062076ad530045687ed34 Description: API library for scanners -- utilities SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package includes the command line frontend scanimage, the saned server and the sane-find-scanner utility, along with their documentation. Package: sane-utils Version: 1.0.10-1.99woody1 Priority: optional Section: graphics Source: sane-backends Maintainer: Julien BLACHE Depends: adduser, libc6 (>= 2.2.4-4), libjpeg62, libsane (>= 1.0.9-3) Replaces: libsane Architecture: i386 Filename: stable/backported-from-sarge/sane-backends/sane-utils_1.0.10-1.99woody1_i386.deb Size: 79034 Installed-size: 153 MD5sum: e6afdcfee43408c4c09b17ba7a996972 Description: API library for scanners -- utilities SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). . This package includes the command line frontend scanimage, the saned server and the sane-find-scanner utility, along with their documentation. Package: scummvm Version: 0.6.0-0.99woody Priority: optional Section: games Maintainer: Tore Anderson Depends: libc6 (>= 2.2.4-4), libmad0 (>= 0.14.2b), libogg0 (>= 1.0rc3-1), libsdl1.2debian (>> 1.2.3), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810), libvorbis0 (>= 1.0rc3-1), zlib1g (>= 1:1.1.4) Suggests: timidity, beneath-a-steel-sky Architecture: i386 Filename: stable/backported-from-sarge/scummvm/scummvm_0.6.0-0.99woody_i386.deb Size: 1100352 Installed-size: 3095 MD5sum: f74a4e96397a84c4e2f357765e2f400e Description: Free implementation of LucasArts' S.C.U.M.M interpreter ScummVM is a 'virtual machine' for several classic graphical point-and-click adventure games. It is designed to run Adventure Soft's Simon the Sorcerer 1 and 2, Revolution's Beneath A Steel Sky, and games based on LucasArts' S.C.U.M.M (Script Creation Utility for Maniac Mansion) system. S.C.U.M.M is used for many games, including Monkey Island, Day of the Tentacle, Sam and Max and more. See the official compatibility list at for a full list of supported games. . The game data of the various games are not included in the Debian distribution due to licensing issues, so you will have to obtain these games from somewhere else if you want to play them. However, Beneath a Steel Sky has recently been released as freeware, you may download it freely from . Package: smake Version: 1.2a18-2.99woody Priority: optional Section: devel Maintainer: Joerg Jaspert Depends: libc6 (>= 2.2.4-4) Architecture: i386 Filename: stable/backported-from-sarge/smake/smake_1.2a18-2.99woody_i386.deb Size: 67238 Installed-size: 126 MD5sum: ab0bb69e9fb859427b805825645b53fc Description: Schily make. Portable, extensible make A portable make program optimized to be used with 'makefiles'. smake includes special automake features that allow to do easy portable compilation. Package: smartmontools Version: 5.26-4.99woody Priority: optional Section: utils Maintainer: Guido Guenther Depends: sysvinit (>= 2.80-1), libc6 (>= 2.2.4-4) Recommends: mailx | mailutils Conflicts: smartsuite, ucsc-smartsuite Architecture: i386 Filename: stable/backported-from-sarge/smartmontools/smartmontools_5.26-4.99woody_i386.deb Size: 182226 Installed-size: 391 MD5sum: 7bec13b7a9d11d5a3f5e26493e12545c Description: control and monitor storage systems using S.M.A.R.T. The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI hard disks. It is derived from the smartsuite package, and includes support for ATA/ATAPI-5 disks. It should run on any modern Linux system. Package: ss-dev Version: 2.0-1.34+1.35-WIP-2003.08.21-2.99woody Priority: extra Section: libdevel Source: e2fsprogs (1.34+1.35-WIP-2003.08.21-2.99woody) Maintainer: Theodore Y. Ts'o Depends: libc6-dev | libc-dev, libss2 Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/ss-dev_2.0-1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 15870 Installed-size: 61 MD5sum: ea616c6cb52886923698628b7080a6c0 Description: Command-line interface parsing library - headers and static libraries This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. . This package contains the development environment for the ss library. Package: sylpheed Version: 0.8.1-1.99woody Priority: optional Section: mail Maintainer: Gustavo Noronha Silva Depends: libc6 (>= 2.2.4-4), libcompfaceg1, libgdk-pixbuf2 (>= 0.17.0-2), libglib1.2 (>= 1.2.0), libgpgme6, libgtk1.2 (>= 1.2.10-4), libjconv2, libldap2 (>= 2.0.23-1), libpisock8, libpng2(>=1.0.12), libsasl7, libssl0.9.6, xlibs (>> 4.1.0) Recommends: xfonts-100dpi | xfonts-75dpi | xfonts-100dpi-transcoded | xfonts-75dpi-transcoded, aspell-dictionary Suggests: jpilot, sylpheed-doc (>= 20020420-3) Provides: mail-reader, news-reader Architecture: i386 Filename: stable/backported-from-sarge/sylpheed/sylpheed_0.8.1-1.99woody_i386.deb Size: 1298812 Installed-size: 3140 MD5sum: fb7e8474afdbc869e8f551b8429951bf Description: Light weight e-mail client with GTK+ Light weight e-mail client with GTK+ running on X Window System. And aiming for * Quick response * Graceful, and sophisticated interface * Easy configuration, intuitive operation * Abundant features The appearance and interface are similar to some popular e-mail clients for Windows, such as Outlook Express or so. The interface is also designed to emulate the mailers on Emacsen, and almost all commands are accessible with the keyboard. Package: sysvinit Version: 2.84-2woody1.0.0.1 Essential: yes Maintainer: Miquel van Smoorenburg Pre-Depends: libc6 (>= 2.2.4-4) Depends: dpkg (>= 1.4.0.21), mount (>= 2.7i-1), util-linux (>= 2.9t-2), e2fsprogs (>= 1.15-1) Conflicts: last, file-rc (<= 0.5.7), kbd (<< 0.95-2), mdutils (<< 0.35-9) Replaces: last, bsdutils (<=2.0-2), dpkg (<< 1.9.17) Architecture: i386 Filename: stable/backported-from-sarge/sysvinit/sysvinit_2.84-2woody1.0.0.1_i386.deb Size: 110764 Installed-size: 260 MD5sum: 529c7c3bae7dc9997aa1e264d3b4cdd8 Description: System-V like init. Init is the first program to run after your system is booted, and continues to run as process number 1 until your system halts. Init's job is to start other programs that are essential to the operation of your system. All processes are descended from init. For more information, see the manual page init(8). Package: uml-utilities Version: 20030903-3.99woody Priority: extra Section: otherosfs Maintainer: Matt Zimmerman Depends: adduser, makedev (>= 2.3.1-62), libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), libreadline4 (>= 4.2a-4) Suggests: user-mode-linux Architecture: i386 Filename: stable/backported-from-sarge/uml-utilities/uml-utilities_20030903-3.99woody_i386.deb Size: 46802 Installed-size: 144 MD5sum: e60a4f51bfc2305a83b9e70a3f47d791 Description: User-mode Linux (utility programs) User-mode Linux is a port of the Linux kernel to its own system call interface. It provides a kind of virtual machine, which runs Linux as a user process under another Linux kernel. This is useful for kernel development, sandboxing, jailing, experimentation, and many other things. . This package contains userspace utilities for use with User-mode Linux, including uml_mconsole, uml_moo, uml_switch, uml_net and tunctl. Package: unrar Version: 3.1.3-0.99woody Priority: optional Section: non-free/utils Maintainer: Petr Cech Depends: libc6 (>= 2.2.4-4), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810) Conflicts: rar (<= 2.60-1) Architecture: i386 Filename: stable/backported-from-sarge/unrar/unrar_3.1.3-0.99woody_i386.deb Size: 84054 Installed-size: 186 MD5sum: 70d8f462af697d064456d14c893c696e Description: Unarchiver for .rar files Unrar can extract files from .rar archives. If you want to create .rar archives, install package rar. Package: util-linux Version: 2.12h-2.99woody1 Priority: required Section: base Essential: yes Maintainer: LaMont Jones Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), slang1 (>> 1.4.4-7.1), zlib1g (>= 1:1.1.4) Suggests: util-linux-locales, kbd | console-tools, dosfstools Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21) Replaces: miscutils, setterm, fdisk Architecture: i386 Filename: stable/backported-from-sarge/util-linux/util-linux_2.12h-2.99woody1_i386.deb Size: 369460 Installed-size: 735 MD5sum: 6025ea3bc19dc2aa290fe7586e152380 Description: Miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to partition your hard disk, view kernel messages, and create new filesystems. Package: util-linux Version: 2.12h-2.99woody Priority: required Section: base Essential: yes Maintainer: LaMont Jones Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), slang1 (>> 1.4.4-7.1), zlib1g (>= 1:1.1.4) Suggests: util-linux-locales, kbd | console-tools, dosfstools Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21) Replaces: miscutils, setterm, fdisk Architecture: i386 Filename: stable/backported-from-sarge/util-linux.old/util-linux_2.12h-2.99woody_i386.deb Size: 369374 Installed-size: 735 MD5sum: 536b0dc7affd7d140a0eebd0c95c4428 Description: Miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to partition your hard disk, view kernel messages, and create new filesystems. Package: util-linux-locales Version: 2.12h-2.99woody1 Priority: optional Section: utils Source: util-linux Maintainer: LaMont Jones Depends: util-linux (>= 2.12h-0), util-linux (<< 2.12h.0-0) Replaces: util-linux (<< 2.11b) Architecture: all Filename: stable/backported-from-sarge/util-linux/util-linux-locales_2.12h-2.99woody1_all.deb Size: 1071572 Installed-size: 2843 MD5sum: 3b8f4b226d5d2f9761f3c50bfe2458b1 Description: Locales files for util-linux This package contains the internationalization files of for the util-linux package. . They are needed when you want the programs in util-linux to print their messages in other languages than English. Package: util-linux-locales Version: 2.12h-2.99woody Priority: optional Section: utils Source: util-linux Maintainer: LaMont Jones Depends: util-linux (>= 2.12h-0), util-linux (<< 2.12h.0-0) Replaces: util-linux (<< 2.11b) Architecture: all Filename: stable/backported-from-sarge/util-linux.old/util-linux-locales_2.12h-2.99woody_all.deb Size: 1071480 Installed-size: 2843 MD5sum: 870e6135ec5681e445186101cdd60341 Description: Locales files for util-linux This package contains the internationalization files of for the util-linux package. . They are needed when you want the programs in util-linux to print their messages in other languages than English. Package: uuid-dev Version: 1.2-1.34+1.35-WIP-2003.08.21-2.99woody Priority: extra Section: libdevel Source: e2fsprogs (1.34+1.35-WIP-2003.08.21-2.99woody) Maintainer: Theodore Y. Ts'o Depends: libc6-dev | libc-dev, libuuid1 (= 1.34+1.35-WIP-2003.08.21-2.99woody) Replaces: e2fslibs-dev (<< 1.15) Architecture: i386 Filename: stable/backported-from-sarge/e2fsprogs/uuid-dev_1.2-1.34+1.35-WIP-2003.08.21-2.99woody_i386.deb Size: 30956 Installed-size: 62 MD5sum: 6babbbfa3af285c2f39d9246e8effbfb Description: Universally unique id library - headers and static libraries libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This package contains the development environment for the uuid library. Package: watchdog Version: 5.2.3-1.99woody Priority: extra Section: admin Maintainer: Michael Meskes Depends: libc6 (>= 2.2.4-4), makedev (>= 2.3.1-24) | devfsd Architecture: i386 Filename: stable/backported-from-sarge/watchdog/watchdog_5.2.3-1.99woody_i386.deb Size: 54248 Installed-size: 125 MD5sum: ddbfcacbbb8c72e11945520891699bd9 Description: A software watchdog The watchdog program writes to /dev/watchdog every ten seconds. If the device is open but not written to within a minute the machine will reboot -- a feature available when "software watchdog" support is compiled into the kernel. . The ability to reboot will depend on the state of the machine and interrupts. To use this software, linux 1.3.52 or later is needed. Package: wireless-tools Version: 27-0.99woody Priority: extra Section: net Maintainer: Guus Sliepen Depends: libc6 (>= 2.2.4-4), libiw27 (>= 27) Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/wireless-tools_27-0.99woody_i386.deb Size: 100160 Installed-size: 175 MD5sum: 33624c2b46dca8f26c1c485fd1f586d8 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. Package: wireless-tools-udeb Version: 27-0.99woody Priority: extra Section: debian-installer Source: wireless-tools Maintainer: Guus Sliepen Depends: libiw27-udeb (= 27-0.99woody) Architecture: i386 Filename: stable/backported-from-sarge/wireless-tools/wireless-tools-udeb_27-0.99woody_i386.deb Size: 25400 Installed-size: 50 MD5sum: 8039a92d8e218323ca5bc87376fea5a8 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: wu-ftpd Version: 2.6.2-18.99woody Priority: extra Section: net Maintainer: Chris Butler Depends: libc6 (>= 2.2.4-4), libpam0g (>= 0.72-1), netbase (<< 4.00) | netkit-inetd, perl5 | perl, debconf Suggests: logrotate Conflicts: ftp-server, wu-ftpd-academ (<< 2.5.0), netbase (<< 2.0) Provides: ftp-server Replaces: wu-ftpd-academ (<< 2.5.0) Architecture: i386 Filename: stable/backported-from-sarge/wu-ftpd/wu-ftpd_2.6.2-18.99woody_i386.deb Size: 262526 Installed-size: 521 MD5sum: b2a6f685f4caae5276b1eb706e85effc Description: powerful and widely used FTP server This FTP daemon, originally from the Washington University of St. Louis, is a powerful, and widely used replacement FTP server for Unix systems. The FTP protocol is a method of transferring files between machines on a network and/or over the Internet. . Besides fully supporting the FTP protocol defined in RFCs 959 and 1579 (and others), it adds the following features: o logging of transfers, o logging of commands, o on the fly compression and archiving, o classification of users on type and location, o per class limits, o per directory upload permissions, o restricted guest accounts, o system wide and per directory messages, o directory aliases, o cdpath, o filename filter, o virtual host support (similar to the Apache HTTP server). . This release is maintained by the WU-FTPD Development Group as a public service to the Internet. Package: xsane Version: 0.90-2.99woody Priority: optional Section: graphics Maintainer: Julien BLACHE Depends: libc6 (>= 2.2.4-4), libgimp1.2 (>= 1.2.0), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.10-4), libjpeg62, libpng2(>=1.0.12), libsane (>= 1.0.9-3), libtiff3g, xlibs (>> 4.1.0), zlib1g (>= 1:1.1.4) Suggests: gimp1.2, hylafax-client | mgetty-fax, gv Conflicts: xsane-common Replaces: xsane-gimp1.2, xsane-common Architecture: i386 Filename: stable/backported-from-sarge/xsane/xsane_0.90-2.99woody_i386.deb Size: 1614552 Installed-size: 4286 MD5sum: 2349e85b9e183f4c31e207bdeda7a5d7 Description: A gtk-based X11 frontend for SANE (Scanner Access Now Easy) xsane can be run as a stand-alone program or through the GIMP image manipulation program. In stand-alone mode, xsane can save an image to a file in a variety of image formats, serve as a frontend to a fax program, or send an image to a printer. . SANE stands for "Scanner Access Now Easy" and is an application programming interface (API) that provides standardized access to any raster image scanner hardware (flatbed scanner, hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The SANE standard is free and its discussion and development are open to everybody. The current source code is written to support several operating systems, including GNU/Linux, OS/2, Win32 and various Unices and is available under the GNU General Public License (commercial applications and backends are welcome, too, however). Package: xsane-gimp1.2 Version: 0.90-2.99woody Priority: optional Section: graphics Source: xsane Maintainer: Julien BLACHE Depends: xsane (>> 0.90-2) Architecture: i386 Filename: stable/backported-from-sarge/xsane/xsane-gimp1.2_0.90-2.99woody_i386.deb Size: 35666 Installed-size: 45 MD5sum: b2883979a834743e3bccb413fe22e0ff Description: [dummy] A gtk based X11 frontend for SANE (Scanner Access Now Easy) This package is a dummy package depending on xsane (>= 0.90-3). . As of version 0.90-3, the xsane-gimp1.2 package no longer exists, and the xsane package is built with GIMP 1.2 support. . You can safely remove this package. Package: zsh Version: 4.0.6-27.99woody Priority: optional Section: shells Maintainer: Clint Adams Depends: debconf, libc6 (>= 2.2.4-4), libcap1, libncurses5 (>= 5.2.20020112a-1) Suggests: zsh-doc Architecture: i386 Filename: stable/backported-from-sarge/zsh/zsh_4.0.6-27.99woody_i386.deb Size: 1635618 Installed-size: 3323 MD5sum: 839ac36237bc48e464cc0c93cd652ecb Description: A shell with lots of features Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell script command processor. Of the standard shells, zsh most closely resembles ksh but includes many enhancements. Zsh has command-line editing, built-in spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and a host of other features. Package: zsh-doc Version: 4.0.6-27.99woody Priority: optional Section: shells Source: zsh Maintainer: Clint Adams Conflicts: zsh (<< 3.1.6.pws9-1) Architecture: all Filename: stable/backported-from-sarge/zsh/zsh-doc_4.0.6-27.99woody_all.deb Size: 569426 Installed-size: 1919 MD5sum: 2df6f1e933cee8e9f660ce5f9bed749f Description: zsh documentation - info/HTML format Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell script command processor. Of the standard shells, zsh most closely resembles ksh but includes many enhancements. Zsh has command-line editing, built-in spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and a host of other features. . This contains the documentation in GNU info and HTML formats. Package: zsh-static Version: 4.0.6-27.99woody Priority: optional Section: shells Source: zsh Maintainer: Clint Adams Depends: zsh Suggests: zsh-doc Conflicts: zsh30-static (<< 3.0.8-5) Architecture: i386 Filename: stable/backported-from-sarge/zsh/zsh-static_4.0.6-27.99woody_i386.deb Size: 576498 Installed-size: 1204 MD5sum: 5350f8501fbf92fee2962900d906e77e Description: A shell with lots of features (static link) Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell script command processor. Of the standard shells, zsh most closely resembles ksh but includes many enhancements. Zsh has command-line editing, built-in spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and a host of other features. . This is the statically-compiled version of the shell.